Foam gasket

●RoHS compliant ●UL 94V-0 ●Halogen Free	●Low surface Resistance ●Good Abrasion Resistance
•This gasket consists of conductive fabric, metal foil over foam for good shielding effectiveness with low surface resistance, Used for grounding and shielding. •It is easy to attach with pressure sensitive adhesive and easy to cut to any length for trouble-free installation. •Custom shapes are available to meet customer needs.

FABRIC TYPE

■Characteristic •Superior shielding effectiveness & compression set

■Structure

■Shielding effectiveness

•Test standard : Advantest [MIL DTL-83528C equivalent] •Sample size : 10mm(W) x 5mm(T), double sided PSA(T222) •Surface material : conductive fabric (Polyester + Cu, Ni)

■Application

OA device, PDP/LCD TV, mobile device, and etc.

ALUMINUM FOIL TYPE

■Characteristic •Lower cost

■Structure

■Shielding effectiveness

•Test standard : Advantest [MIL DTL-83528C equivalent] •Sample size : 15mm(W) x 2mm(T), double sided PSA (T222) •Surface material : aluminum foil

■Application

PDP/LCD TV, Monitor, and etc.

MATERIAL SELECTION

•Surface : conductive fabric, aluminum foil

•Core : PU foam, EPDM foam, etc.

•Double sided PSA :

conductive mesh type, aluminum foil type, conductive non carrier type, non-woven fabric type(non-conductive),

etc.

•Release liner : paper or PET film

PART NUMBER STRUCTURE

SHAPES & DIMENSIONS

■Rectangular type	■D type
(Rectangular type product list Click)	(D type product list Click)

■O type	■P type
(O type product list Click)	(P type product list Click)

■Double P type	■L type
(Double P type product list Click)	(L type product list Click)

■C-fold type	■C-fold(with PET film) type
(C-fold type product list Click)	(C-fold(with PET film) type product list Click)

■Knife Edge type	■T type
(Knife Edge type product list Click)	(T type product list Click)

■U type	■Small b type
(U type product list Click)	(Small b type product list Click)

■Double Rectangular type	■Bell shape type
(Double Rectangular type product list Click)	(Bell shape type product list Click)

※ Processing into other various shapes and dimension are possible

CONVERSION SERVICE, CUSTOM SHAPES & SIZES

■Die-cutting Die-cut conversion, custom shapes and sizes are available, to meet customer needs and specifications. One time tooling charge may incur.

■Cutting as specified length

TEST & DATA

■Compression-deflection-resistance test

•Test standard : ESQ-517-27 (referred to various test method) •Sample : SF100100R-M-NC-A •Sample size : 10mm(W) x 10mm(T) x 50mm(L) •Recommended compression : Approx. 30%

USAGE EXAMPLES

GASKET TYPE SELECTION GUIDE

Electricity is conducted through the outer conductive layer of the gasket from A to B. Use of conductive PSA increases the electrical contact area between the gasket’s outer layer and B at a slight sacrefice of PSA’s adhesive strenth and cost over non-conductive PSA. When the width of the gasket is narrow, conductive PSA is required.